Productivity Cube Timer Gravity Sensor Flipping LED Display 4 Preset Time Dual Modes Countdown Cooking Study Mini Digital Timer
There are four types of timers in the link. Please refer to the clear introduction about different styles of timers.
The functions of different timers are different, please pay attention to differentiation,
A has more advanced functions than B and C, and the workmanship is more exquisite.

Production information
Name: Gravity induction timer (charging version)
Size: 44 * 44 * 46mm
Material: ABS
Product parameters
Battery capacity: 500mAh
Working temperature: 0 ° C-50 ° C
Standard power consumption:<20uA
Sleep power consumption: < 150uA
Working current: 11mA
Charging current: 500mA
Volume range: Mute/vibrate, 90~100dB loud, 70~80dB low
Product operation instructions
Gravity mode: Turn the button to mode 1: Flip 5-10-30-60 minutes upwards to automatically start the countdown. The screen will flip upwards and pause, while the opposite screen will clear to zero for timing downwards.
Manual mode: Move the button to mode 2: Adjustable M/S button, press the middle button ST/SP to start the countdown.
Timing:
1.When the display is 00:00, short press the [SP/ST] key to start the countdown.
2.During the timing process, short press the [SP/ST] button to pause/start the countdown;
3. In a paused state, long press the [ST/SP] key to reset to zero.
Countdown setting:
1. Short press the [M/S] key to gradually increase the countdown time, long press the [M/S] key to quickly increase the countdown time. After setting, short press the [SP/ST] key to start the countdown;
During the timing process, short press the [SP/ST] button to pause/start the countdown;
3. In a paused state, long press the [SP/ST] key to reset to zero;
4. After the countdown time reaches 00:00, there will be a one minute long alarm clock (the "Didi Di" LED screen will light up/the sound will stop, and the LED screen will turn off - these two prompts are grouped in a 1-second cycle - to remind you).
Silent mode vibration reminder.
5. Memory mode: After the countdown ends, briefly press the [SP/ST] button again to display the current set time. To reset to zero, press and hold the ST/SP button. Short press to cycle through the operation again.
Matters needing attention:
If the user forgets to turn off the device, or if there is no action after 5 minutes, the product will automatically go to sleep;
2. After the countdown ends, the alarm duration is 1 minute;
3. After hibernation, if the shutdown gravity mode is not toggled, it can be flipped and used immediately. The manual mode can be adjusted with just one press;
In silent mode, there is vibration feedback at the end of the timer or any operation. There is a "beep" feedback during operation in volume mode;
5. If the battery level is below 10%, the screen will flash, reminding to charge. The charging process will light up with a red light, while the fully charged green light will remain on.
Production information
Name: Gravity Timer (Battery version, shipped without battery)
Material: ABS+Electronics
Size: 6.6 x 6.6 x 6.6cm
Timing: 15-20-30-60 minutes
Power supply mode: 2 No. 7 batteries (not included)
Function: Automatic power-off, pause time (switch face up, pause time available)

Production information
Material: ABS+Electronics
Size: 6 x 6 x 6cm
Timing: 5-15-25-45 minutes
Power supply mode: 2 No. 7 batteries (not included)
Function:
1. Volume adjustment (mute, bass, treble)
2. Pause time: When the side with the switch faces up, the time will be paused.

Information(Six sided gravity timer)
Color: White/Black
Size: 53 * 53 * 48mm
Material: ABS
Packaging: Box
Timing range: Maximum timing: 99-00 minutes; Seconds 00-59
Gravity sensing timing, preset 5 sets of timing times, user-friendly reminders, and adjustable sound levels
Parameter
Working temperature: 0 ° C-50 ° C
Volume settings: Ringing/Vibration/Mute
Working current: 11.5mA
Charging current: 500mA
Battery capacity: 500mAh
Time difference: plus or minus 1s/d
Battery life: about 6-8 months.
Operating instructions
Press and hold the button for 2 seconds to turn on and off the device. The LED will fully display, and with a beep, the device will turn on.
Click the button to switch sound effects, default ringing vibration mute Cycle.
Flip the timer upwards to automatically start the timer
Flip 1-5-10-30-60 minutes upwards to automatically start the countdown
When the screen flips up, the current time pauses, and when the screen flips down, the timer resets to zero
Charging reminder
When the battery level is below 10%, the screen flashes to remind charging. The red light is on during the charging process, and the green light remains on when fully charged.